FOR SALE Senior Packard Parts

Chassis, Engine & Body Sheet Metal

The following pictures could take a while to load, please be patient.

Listed below are additional parts available but not yet photographed.


* Other Front and Rear Fenders, Running Boards, V-12 Hoods, Door Skins, Etc.

* Grill Shells for 35, 36, and 37 all models

* 36 Grill Shutter assembly for Standard 8, Super 8, and Twelve.

* 35-37 Golf Bag Door for all Coupes and Convertible Coupes.

* 35-36 Standard-8 Angleset Rear End Drum to Drum - 4.67 gear ratio.

* 35-36 Standard-8 & Super-8 Front Axle, Spindles, and Tie Rod.

* 35-36 Standard-8 Steering Drag Link.

* 35-36 Front Leaf Springs with Intact Covers

* 35-36 1201/1401 134" Wheel Base Frame - Sand Blasted and Primed.

* 35-36 Steering Gear Assembly, Column, and Steering Wheel.

* 35-36 Firewall Throttle Linkage.

* 35-36 Bijur Parts including Frame Fittings.

* MANY MORE SMALL PARTS FROM 4 SENIOR 35-37 PACKARDS - PLEASE ASK.
 




CLICK TO ENLARGE THUMBNAIL PICTURES
Restored 35 Super8 & V12 Front Wheel Welled Fenders - Excellent Condition
If your fenders are bad, don't spend a fortune on repair, buy these and keep yours as spares

ALSO HAVE A SET OF SU-8 & V-12 NON SIDEMOUNT FRONT FENDERS AVAILABLE.




CLICK TO ENLARGE THUMBNAIL PICTURES
1937-39 Packard V-12 side mount tread covers. Left and Right.
Excellent condition media blasted with no rust and primered with epoxy DP90 paint.
Stainless Steel Trim pieces also in excellent condition.
7.5" width, 26.5" opening, and about 65" around the trim. Just paint your color and install.


CLICK TO ENLARGE THUMBNAIL PICTURES
1937 Super 8 Side Mount Face Plate with Stainless Steel Trim.
Excellent condition media blasted with no rust and primered with epoxy DP90 paint.
Dimensions: 31 1/4" Diameter 14 3/4" Inside Opening.

CLICK TO ENLARGE THUMBNAIL PICTURE
35-36 Super-8 and V12 Matched Side Mount Arms & have both Su8 and V12 Helmets Available

CLICK TO ENLARGE THUMBNAIL PICTURES
Patch Piece for Right Front Fender - Media Blasted and Primed w/DP90

CLICK TO ENLARGE THUMBNAIL PICTURES
Patch Piece for Left Rear Fender - Solid Metal, Needs Hammer Work

CLICK TO ENLARGE THUMBNAIL PICTURES
Door Sills - perfect steel - Fits 1200, 1400, and 1500 Sedans
With modifications could be made to fit any 35-37 body style - 2 or 4 door

CLICK TO ENLARGE THUMBNAIL PICTURES
Patch Piece for Left Rear Fender Gas Inlet - Top 6" is fine.

CLICK TO ENLARGE THUMBNAIL PICTURE
Long Boards Fit 1202/1402/1502 139" WB cars
Sand Plasted and Primed in DP-90
Short Boards Fit 1201/1401/1501 134" WB cars
Right Good Condition, Left Needs Sheet Metal Welded in.


CLICK TO ENLARGE THUMBNAIL PICTURES
35-37 Running Board Set of 6 Brackets - Also 2 Odd Brackets


CLICK TO ENLARGE THUMBNAIL PICTURES
35-36 Super 8 Hood Side Panels - Solid but need some straightening
I also have hood top panels for these available

CLICK TO ENLARGE THUMBNAIL PICTURES
35-36 Standard-8 hood complete sheetmetal - good condition

CLICK TO ENLARGE THUMBNAIL PICTURES
35-36 Standard-8 hood sheet metal - top 3 pieces, no side panels
(the one side panel shown has been sold)


CLICK TO ENLARGE THUMBNAIL PICTURES
37 Super 8 Hood Sheetmetal (5 pieces) plus Hinge Rods (4)


CLICK TO ENLARGE THUMBNAIL PICTURES
37 Super 8 Cowl Vent with Screen


CLICK TO ENLARGE THUMBNAIL PICTURES
37 Grill Shells - Red Oxide Shell SOLD, Gray Shell Good Condition

CLICK TO ENLARGE THUMBNAIL PICTURES
35 Grill Shell - Excellent Condition

CLICK TO ENLARGE THUMBNAIL PICTURE
Various 35 and 36 Grill Shells


CLICK TO ENLARGE THUMBNAIL PICTURES
Rust free cowl for 37 closed cars
I had planned to build a BoatTail but have too many projects. Have door skins, fenders, hoods, etc available.

CLICK TO ENLARGE THUMBNAIL PICTURE
1937 1500 Super Eight Sedan All 4 Doors. - Very Good Condition - Must Pick Up.

CLICK TO ENLARGE THUMBNAIL PICTURE
1937 - 38-39? Front Drivers Side Door Skin - No Rust, Media Blasted and in DP909 Epoxy Primer.
If you have rusty bottoms, use this to replace entire skin up to body line to reduce warpage.

CLICK TO ENLARGE THUMBNAIL PICTURE
1937 - 38-39? Rear Drivers Side Door Skin - No Rust, Media Blasted and in DP909 Epoxy Primer.
If you have rusty bottoms, use this to replace entire skin up to body line to reduce warpage.

CLICK TO ENLARGE THUMBNAIL PICTURE
1935-36 Drivers Side Lower 'A' Pillar. If yours is rusty, use this to replace it.

CLICK TO ENLARGE THUMBNAIL PICTURE
1935-36 (Possibly others) Front Seat Bottom Sheet Metal. Media Blasted and in DP90 Epoxy Primer.

CLICK TO ENLARGE THUMBNAIL PICTURES
37 'B' Pillars with New Wood


CLICK TO ENLARGE THUMBNAIL PICTURE
37 Front Door Upper and Lower Hinges
'B' Pillar Upper and Lower Support Brackets
Firewall to Steering Column Support Bracket


CLICK TO ENLARGE THUMBNAIL PICTURE
37 Front Fender Supports and Radiator Support


CLICK TO ENLARGE THUMBNAIL PICTURE
35-36 maybe 37 Frame Mount Battery Bracket and Lower Support


CLICK TO ENLARGE THUMBNAIL PICTURES
37 Super-8 Firewall Throttle Linkage

CLICK TO ENLARGE THUMBNAIL PICTURES
35-37 Firewall Oil Pressure Guage Fittings

CLICK TO ENLARGE THUMBNAIL PICTURES
35-37 Shutter Control Thermostat

CLICK TO ENLARGE THUMBNAIL PICTURES
33-36 8 & Super-8 Distributor Drive Shaft - Part# 162624

CLICK TO ENLARGE THUMBNAIL PICTURES
35-36 8 & Super-8 Motor Oil Coolers (2) Part# 223027-1

CLICK TO ENLARGE THUMBNAIL PICTURES
V-12 Spark Plug Wire Tube - Left Side Only

CLICK TO ENLARGE THUMBNAIL PICTURES
35-36 8 & Super-8 Motor Support Front - Part# 223326

CLICK TO ENLARGE THUMBNAIL PICTURES
35-36 8 & Super-8 Motor Support L&R Brackets - Part# 223345 & 2233346
Also Brake Cable Bracket and Muffler Bracket

CLICK TO ENLARGE THUMBNAIL PICTURES
35-36 Engine Splash Pans - top 3 (std) have been sold, the bottom 1 for Super-8 is still available.

CLICK TO ENLARGE THUMBNAIL PICTURES
35-36 Std-8 and Super-8 Bare Front Backing Plates

CLICK TO ENLARGE THUMBNAIL PICTURES
35-36 8 & Super-8 Brake Parts - more available than shown
Miscellaneous Body and Chassis Parts

CLICK TO ENLARGE THUMBNAIL PICTURES
Miscellaneous Body and Chassis Parts

Please E-Mail Ken at: dbscorp@pacbell.net

RETURN